#Raspberry pi flirc case how to#
#Raspberry pi flirc case install#

Yes, designed, proven, and tested only for the Raspberry Pi 4B Does the case support the Raspberry Pi 4?.

#Raspberry pi flirc case how to#

Visit the Pi-hole website to learn more about this awesome ad-blocking project for your Raspberry Pi, then go to the documentation website to learn how to quickly and easily set up Pi-hole in your home! FAQs We also include this case in our Official Pi-hole Raspberry Pi 4 kit, including everything you need to get started in one box. There is no need for disassembly to get to the SD card either! We included rubber feet to raise the enclosure and ensure a steady, scratch-free case for your desk. It only takes a few seconds to drop your Raspberry Pi into its new stylish home and show it off on your desk. Supplied with the case are a thermal pad and 4 screws for the simplest Raspberry Pi case assembly. The aluminium housing of the case acts as a very efficient built-in heat sink, taking heat away from your Raspberry Pi 4 CPU and dissipating it through the case- no fans required! The top panel has the classic pi-hole logo branding, showing off your ad-denying abilities! This exclusive Official Pi-hole edition FLIRC Raspberry Pi 4 case is made of a beautiful custom blue-tinted aluminium core heat sink that is sandwiched between two black, soft-touch shells. If that’s not a deal-breaker for you, though, then this is a great case to get.The perfect home for your Raspberry Pi 4 and your Pi-hole ad-blocking project! If only the GPIO pins remained accessible. We love the style of the Flirc case, and its heat sink opens up a world of overclocking. We’re going to experiment some more with overclocking, which makes this a fun case. We also played around with CPU clock speeds up to 2.0GHz, which idled at 48 ☌ and maxed out at 69 ☌. The overclocked Raspberry Pi (inside the Flirc case) idled at 41 ☌, and running our five-minute stress test took it up to 67 ☌. We took the CPU clock speed up to 1.75GHz. This time it idled at a mere 28 ☌ and our five-minute stress test took it up to a mere 46 ☌.īecause this is comfortably below the threshold, it opens up a world of overclocking (something that has been reintroduced on Raspberry Pi 4). Next, we put a Raspberry Pi into the Flirc Raspberry Pi 4 case and ran the same test. Unsurprisingly, the Raspberry Pi with no heat sink attached quickly went up to 79 ☌ and hovered at that level for the rest of the test, nudging up against (but not pushing over) the level where Raspbian starts to throttle the CPU. Warning! Don’t do this at home without doing your research first. For each test, we left the Raspberry Pi to run for five minutes. This puts all four cores of Raspberry Pi 4 under stress.

#Raspberry pi flirc case install#

We used stress (apt install stress) and the following script from Core Electronics to test our Raspberry Pi 4 while measuring temperature: while true do vcgencmd measure_clock arm vcgencmd measure_temp sleep 10 done& stress -c 4 -t 300s Watch your Raspberry Pi and restart afterwards. WARNING!: Stress testing should only be done for short periods. We stress-tested a Raspberry Pi 4 board on its own vs a Raspberry Pi 4 inside the Flirc case to see what temperatures it reported. However, for many of us, GPIO pins are the very essence of Raspberry Pi. If you plan to use Raspberry Pi as a desktop computer, then this might be a valid trade-off. But it’s an ungainly addition to such a lovely looking case. To Flirc’s credit, it has addressed this issue via a small gap on the underneath of the Flirc Raspberry Pi 4 case, which could be used with a breakout I/O cable. Unlike the official case, the lid cannot be quickly removed to provide access to the pins. One downside to the sealed approach is that the GPIO pins are hidden away inside the case. The microSD card slot is easily accessible, and a small cut-out on the enclosure enables the LEDs to shine through. Everything is neatly constructed from high-quality materials and there’s considerable charm to the heat sink. Putting together the case is ludicrously simple: you simply drop a Raspberry Pi in the bottom half, attach the thermal paste, squidge down the lid, and use four screws to hold everything together.įlirc claims that this is “the most beautifully crafted Raspberry Pi 4 case” and it’s not a wholly unwarranted claim. You use this to squidge the Raspberry Pi to the heat sink. Inside the pack is a square thermal pad (similar in substance to Blu Tack).

This turns the whole of the aluminium case into a giant heat sink, cooling down your Raspberry Pi 4. Here’s where things get clever: inside the case is a protruding heat sink that reaches down to Raspberry Pi 4’s CPU.